Ferro-based Alloy Powder

Fe-based alloy powders refer to cost-effective high-performance powder materials formulated with iron as the matrix, by incorporating alloying elements such as chromium, manganese, silicon, boron, carbon and nickel. Endowed with the characteristics of low cost, excellent process compatibility and flexibly adjustable mechanical properties, they serve as the preferred consumable materials for surface strengthening and repair under medium-low temperature and low-load service conditions. These powders are widely applicable to the operational requirements of High-Velocity Oxygen Fuel spraying equipment (HVOF), plasma surfacing equipment and laser cladding equipment, achieving a balance between component protection performance and production cost control.
  • Detail
  • Parameters

Product Grade

Chemical Composition

Apparent Density(g/Cm³)

Hardness

(HRC)

Manufacturing

Process

Application

Process

Typical Application

Flow rate(s/50g)

Vela309

C0.08;Si1.0;Mn2.0;S0.03;P0.035;Cr18.0;Ni10.0;FeBal

3.40

22-28

Gas AtomizationHVAF/HVOF/PTA LASER/POWER METALLURGYProtection, remediation and maintenance against corrosion, cavitation and low-temperature particle erosion

16-20

Vela316

C<0.08;Si<2.0;Ni12.0;Mo<2.0;Cr17.0;FeBal

4.50

18-22

Gas AtomizationHVAF/HVOF/PTA LASER/POWER METALLURGYProtection, remediation and maintenance against corrosion, cavitation and low-temperature particle erosion

15-19

Vela430

C0.12;Si0.75;Mn1.0;P0.04;S0.03;Ni0.6;Cr1.6;FeBal

3.80

20-25

Gas AtomizationHVAF/HVOF/PTA LASER/POWER METALLURGYProtection, remediation and maintenance against corrosion, cavitation and low-temperature particle erosion

18-23

Vela431C0.15-0.25;B<1.0;Si,1.0;Ni1.5-2.5;Mo1.0-2.0;Mn<1.0;Cr15.0-170;FeBal.4.0035-42Gas AtomizationHVAF/HVOF/PTA LASER/POWER METALLURGYProtection, remediation and maintenance against corrosion, cavitation and low-temperature particle erosion7-22
VelaFe30C0.2;Si3.00;B1.50;Cr6.00;Ni28.0;FeBal.4.530Gas AtomizationPTA/HVAF/HVOFExcellent fatigue resistance, suitable for low-hardness applications subjected to repeated impacts15-19
VelaFe45C0.6;Si3.00;B2.00;Cr12.00;Ni20.0;W3.0;FeBal.4.545Gas AtomizationPTA/HVAF/HVOFRepair for valves, sealing surfaces and easily worn parts of machinery16-20
VelaFe55C1.2;Si3.50;B2.60;Cr22.00;Ni15.0;FeBal.4.755Gas AtomizationPTA/HVAF/HVOFRepair rake blades, hoe teeth, oil drill pipe joints and scraper shafts17-21
VelaFe60C1.5;Si13.5;B3.0;Cr35.0;Ni15.0;FeBal.4.360Gas AtomizationPTA/HVAF/HVOFRepair rake blades, hoe teeth, oil drill pipe joints and scraper shafts18-22
VelaFe60DC4.5;Si1.50;B1.50;Cr37.0;Ni3.0;FeBal.4.760Gas AtomizationPTA/HVAF/HVOFRepair rake blades, hoe teeth, oil drill pipe joints and scraper shafts19-23
VelaFe253C1.8;Cr28.0;Ni16.0;Mn0.7;Mo4.50;Si1.3;FeBal4.635Gas AtomizationPTAApply to  engine valves17-21
VelaFe253HC2.0;Cr30.0;Ni16.0;Mn0.9;Mo7.0;Si1.6;FeBal4.840Gas AtomizationPTAApply to  engine valves18-22
VelaFe304C<0.08;Si<2.0;Ni10.0;Mn<2.0;Cr18.0;FeBal4.4-Gas AtomizationHVAF/HVOF/PTA LASER/POWER METALLURGYProtection, remediation and maintenance against corrosion, cavitation and low-temperature particle erosion16-20
VelaFe304LC<0.03;Si<2.0;Ni10.0;Mn<2.0;Cr18.0;FeBal4.4-Gas AtomizationHVAF/HVOF/PTA LASER/POWER METALLURGYProtection, remediation and maintenance against corrosion, cavitation and low-temperature particle erosion16-20
VelaFe316LC<0.03;Si<2.0;Ni10.0;Mn<2.0;Cr18.0;FeBal4.8-Gas AtomizationHVAF/HVOF/PTA LASER/POWER METALLURGYProtection, remediation and maintenance against corrosion, cavitation and low-temperature particle erosion15-19
VeLA310sC<0.03;Si<2.0;Mo0.04;Ni20.5;Mn1.0;Cr24.5;V0.11;FeBal4.9-Gas AtomizationHVAF/HVOF/PTA LASER/POWER METALLURGYProtection, remediation and maintenance against corrosion, cavitation and low-temperature particle erosion14-18
VelaFe2205C<0.03;Mo2.0-5.0;Ni4.0-7.0;Cr20.0-25.0;FeBal4.9-Gas AtomizationHVAF/HVOF/PTA LASER/POWER METALLURGYProtection, remediation and maintenance against corrosion, cavitation and low-temperature particle erosion16-20



A:15-45um,B:20-53um,C:15-53um,D:20-45um,E:5-30um,F:5-25um,G:2-10um,H:5-15um,I:5-20um,J:5-25um,K:10-3um,L:10-38um,M:15-38um,N:20-45um,O:45-75um,P:45-90um,Q:45-106um,R:20-106um,S:45-125um,T:45-150um,U:53-125um,V:53-150um

1:1.2mm,2:1.6mm,3:2.0mm,4:2.4mm,5:3.2mm,6:4mm,7:5mm,8:6mm

If you want to know more details about cobalt-based alloy powders, please contact Jiangxi Velavision Mail: lion@jxvelavision.com

Grade
Vela
Brand
Velavision
Manufacture Process
Gas Atomzied
Application Process
HVOF, APS, LASER CLADDING,PTA WELDING
Particle Size
15-45um,20-53um,15-53um,45-90um,20-106um,45-106um,45-125um,53-125um,53-150um
Home
Customer service
Consultation